MS6026 – Process Meter with Tricolor Bargraph and Universal Input

High measurement accuracy – 0.01%.
Temperature stability – drift <10 ppm/°C
Universal input with 31 types of sensors, 6 of which customer adjustable
Universal power supply 90 ÷ 250 VAC
Tricolor bargraph – 7 zones that can be configured by the customer as levels and color – green, red or orange
Five digital outputs that can be controlled with individual set-points
Simultaneously output galvanically isolated current and voltage outputs
Simultaneously output active and passive current output
Galvanically isolated communication port – RS485 MODBUS RTU
Precise temperature correction of the cold end of thermocouples – Pt100, Cl. B
Programmable exponential low frequency filter
Programmable filter for peaks in the measurement circuit
Deep filter for noise rejection from power supply NMRR 80dB at 50Hz or NMRR 65dB for use at 50/60Hz – universal power supply

Description

	MS6026 & MS6126 v2_2 r2015-03-20 BG
	MS6026 & MS6126 v2_2 r2015-03-20 EN

MS6026 is designed for measurement and control of different process parameters. The measured value is displayed on LED display and LED bargraph.
The device supports MODBUS RTU protocol by isolated RS485 serial channel. The analogue output is transmitting and galvanically isolated from the other channels.
The presence of a programmable by color and range bargraph ensures easy and rapid differentiation of normal, warning or critical situations.

The device is applicable as:

Stage ON/OFF controller – up to 4 stages and one alarm output
Process meter with bargraph and five digital outputs
Converter of a technological quantity in unified analogue signal or its transmitions by serial MODBUS RTU protocol