 |
|
|
| Two-wire pH transmitter MS9023PH |
 |
Range and accuracy of measurement
pH -2.00 … 16.00 / 0.01
°C 0.0 … 100.0 / 0.1
mV -700 … 700 / ± 0.3
Two-wire, self-supplying by the line
Automatic calibration
Automatic temperature correction of the calibrating buffers
Degree of protection IP65 |
The two-wire transmitters MS9023, offered by MICROSYST, are designed for supervision of the measured values by ðÍ electrode and transmitting of the signal in long distances to controlling or secondary indicating device, located out of the site.
MS9023 has a function of automatic calibration and automatic temperature correction of the value of the calibrating buffers, and automatic temperature correction in mode of measurement of ðÍ. On the display you can supervise the measured value of pH, the temperature °C or the voltage in mV.
MS9023 self-supplies by the information line. The output signal is unified current, which guarantees noise immunity of the long transfer lines. The connecting cable may be two-wire (it is not necessary to be shielded), which vastly decreases the expences for installation, especially at long distances. Perfect for installation in the open air (IP65).
The device can work as ORP transmitter, if it is for range -2000 ... 2000 mV. |
Look a PDF |
|
|
|
